Single push button with LED and comfort sensors, symbol “leaving the house”

This single push button with the symbol “leaving the house” can be configured to control a variety of actions and routines in a Niko Home Control II installation on bus wiring. It is fitted with a programmable LED that provides (inverted) feedback on the action that is being performed. In addition, the push button can serve as an orientation light when the LED is ON.

Product Code: 161-52921 UGS : ND Catégorie :
  • Thanks to its integrated temperature and humidity sensor, the push button also supports multi-zone climate and ventilation control, allowing you to increase your energy efficiency and overall comfort.
  • Function: • Combine the push button’s temperature sensor with a heating or cooling module for multi-zone control or a switching module for electrical heating
  • Combine its integrated humidity sensor with a ventilation module to perform automatic ventilation control
  • Setpoints and week programmes are managed via the app
  • Calibration is managed via the programming software
  • Maximum number of push buttons set as a temperature sensor per installation: 20
  • Temperature sensor range: 0 – 40°C
  • Temperature sensor accuracy: ± 0.5°C
  • Humidity sensor range: 0 – 100 % RH (non-condensing, nor icing)
  • Humidity sensor accuracy: ± 5 %, between 20 – 80 % RH at 25°C
  • Material central plate: The central plate is made of rigid PC and ASA. The base material is coloured in mass.
  • Lens: The key on the push button is fitted at the bottom with a small amber-coloured LED (1.5 x 1.5 mm) to indicate the status of the action.
  • Colour: cream (coloured in mass, approximately NCS S 1005 – Y10R, RAL 1013)
  • Fire safety
    • the plastic parts of the central plate are self-extinguishing (comply with a filament test of 650 °C)
    • the plastic parts of the central plate are halogen-free
  • Input voltage: 26 Vdc (SELV, safety extra-low voltage)
  • Dismantling: To dismount simply pull the central plate off the base.
  • Protection degree: IP20
  • Protection degree: IP40
  • Impact resistance: After mounting, an impact-resistance of IK06 is guaranteed.
  • Dimensions (HxWxD): 44.5 x 44.5 x 8.6 mm
  • Marking: CE
Coleur

, , , , , , , , , , , ,

Avis

Il n’y a pas encore d’avis.

Soyez le premier à laisser votre avis sur “Single push button with LED and comfort sensors, symbol “leaving the house””

Votre adresse e-mail ne sera pas publiée. Les champs obligatoires sont indiqués avec *

Panier